Skip to content

Prepare a visit

Who can do this
  • Owner
  • Organization admin
  • Concierge

Preparing a visit creates its checklist. The Prepare Visit page lists everything the estate’s schedule plans for the visit, and you choose what goes on it. Every task starts selected, so if you accept the list as it is, you get the full checklist. You can prepare a visit if you can work the estate: its assigned concierge, the concierge assigned to that visit, or an organization admin or owner. A member of staff who maintains an asset on the estate can prepare their own part of it; see Prepare your part of a visit.

  1. Open the estate’s Visit section and select Prepare Visit on the panel that stands in for the checklist. You can also select Prepare Next Visit on the estate’s Tasks tab in settings. The page title names the visit’s date. Only the estate’s next visit can be prepared.

  2. Check the details at the top. Concierge decides who gets tasks that have no assignee of their own; the note under it names that person and says whether the visit is reassigned. Expected time starts on the schedule’s default. Change either for this visit only. On this visit counts what will be created.

  3. Work the list. Each task shows its location, priority, size and assignee, with its task group under its name. Select the assignee to hand the task to someone else; see Assign tasks while preparing. On a narrower screen, the details that don’t fit as columns are listed under the task’s name. A yellow skip icon after a task’s name means it was skipped on the last visit; hover over it, or tap it, to see Skipped last visit. Carried-over work says which visit it comes from under its name.

    The Firm, Carryover and On visit buttons above the list narrow it to one kind of task:

    Kind What it is
    Firm Work the schedule plans for this visit.
    Carryover Work left open on an earlier visit that was never closed out.
    On visit A task already dated to this visit, such as one added by hand. A one-off task can be unchecked. Scheduled tasks and request work are always kept.

    Uncheck a task to leave it off. Use the All, Firm and Carryover buttons, the search box and Sort & filter (priority, size, location, task group, assignee, whether it is selected, and on a multi-day visit its day) to find what you want. The list shows 10 tasks per page.

  4. To act on many tasks at once, filter the list first. The bar above it then offers Add (select every matching task), Remove (deselect them) and Select only these (keep the matching tasks and deselect everything else). These apply to every matching task, not just the page on screen. With no filter, the bar offers Select all and Clear selection.

  5. To add work the schedule doesn’t plan, select Add task at the right of the bar. Pick where it is, name it, and choose how often:

    • Just once: select Next, give it a due date if it has one (the calendar dots the estate’s upcoming visit days), then Next again for its assignees, priority and size. It is created on the visit straight away, rather than held in the draft, and joins the list as an On visit task. Adding it doesn’t prepare the visit: the visit stays Not prepared until you select Prepare. Changed your mind? Uncheck it. When you prepare, it’s skipped on this visit and carried to the next one.
    • Repeats: a recurring task, set up the same way as from the estate’s Tasks tab. If its schedule includes this visit, it joins the list as a selected Firm task. Otherwise it waits for the visits its schedule does include.
  6. Under the list, tick any Approved requests you want worked on this visit. Requests start unticked.

Each line names who it goes to: the task’s own assignees, else the asset’s maintainers, else the visit’s concierge. Carried-over work that was only with the earlier visit’s concierge counts as unassigned, so it follows whoever runs this visit. Carried-over work handed to anyone else keeps them. To change that before the checklist exists:

  1. Select the assignee on a line. A list of the organization’s staff opens; tick one or more people. Use default hands the line back to its asset’s maintainers or the concierge, and Undo pick drops your choice.

  2. To hand many tasks to the same people, tick the tasks and select Assign selected to… in the bar above the list. The choice applies to every selected task the list currently shows, so filter first to narrow it.

  3. Save the draft or prepare the visit. Your picks are part of the draft, and when you prepare they become the tasks’ assignees — on new tasks, on carried-over tasks and on tasks already on the visit alike.

Only staff can be assigned visit work: homeowners are never offered. Someone you hand a task to can complete it even if they don’t otherwise work the estate; it appears on their Tasks page and on the visit page.

Select ⋯ at the end of a line, then Edit task, to change the task’s name, instructions, priority or size before the visit starts.

  • On a Firm line the task does not exist yet. This task only keeps the change in your draft, marks the line edited, and writes the task that way when you prepare. Save the draft to keep it for later.
  • On a Carryover or On visit line the task already exists, so the change is saved straight away.
  • On a scheduled task, owners, organization admins and the estate’s concierge can also choose This and all future tasks, which changes the scheduled task for this estate from here on (see Edit a scheduled task).

Who a line goes to is changed from its assignee, as above.

Select ⋯ at the end of a line, then Delete task, and confirm.

  • On a scheduled task, owners, organization admins and the estate’s concierge can delete it from the estate: it stops repeating there, and its open tasks on the estate are deleted, including ones still carried over after the scheduled task was removed from the estate’s Recurring Tasks. Completed and skipped tasks are kept. The task stays in the Task Library for other estates.
  • On a one-off task, the open task is deleted.

To leave a task off just this visit, untick its line instead.

A member of staff who maintains an asset on an estate, but is neither its concierge nor assigned the visit, prepares only their own tasks: the ones assigned to them and the ones on assets they maintain. For them the page lists just those tasks, with a note that the concierge prepares the rest; the concierge, time, approved requests and Bring list are not offered. They hand any of their lines to a colleague the same way as the concierge does - select the assignee on the line, or Assign selected to… - and only those lines. Preparing writes their tasks onto the visit and leaves everyone else’s as they were, still planned for the concierge to prepare. What their tasks need joins the visit’s Bring list on its own.

You are offered Prepare Visit even when the schedule plans none of your tasks for the visit: the page opens with an empty list, and Add task puts work of your own on the visit, under Where offering every asset your organization looks after, not only the ones you maintain. Preparing with nothing listed is fine: it marks your part as prepared. The offer stays until you have prepared your part, or until the concierge (or an admin) has prepared the whole visit - then there is nothing of yours left to prepare, and the visit page and Home stop offering it. A task you add from the visit page doesn’t count as preparing. Another maintainer preparing their own part does not count as that.

Their draft is theirs: saving it does not touch the concierge’s, and the concierge’s prepare clears every draft for the visit.

Once anyone has prepared their part, the page says so: a note under the title names who has already prepared their tasks, and those tasks are greyed out in the list. They are on the visit and cannot be unticked or reassigned here; each shows who prepared it under its name. There is no note until someone has prepared something.

A visit that spans several days (Days Onsite above 1 on the schedule, or a visit rescheduled for several days) gives every task a day of the visit, so the visit checklist can show each day’s work on its own. A single-day visit shows none of this.

Each task starts on a default day. A task that was on an earlier visit, such as a recurring task or a carryover, keeps the day it had then. The rest are spread evenly over the days, with larger tasks counting for more, so each day carries about the same amount of work. The Day column shows the day each task is on, and Day 1 · 4, Day 2 · 3 under On this visit counts the selected tasks per day.

  1. To move one task, select its Day button and pick another day. Any day puts it on every day’s list. A task you have moved is outlined; its menu offers Undo pick to put it back on its default day.

  2. To move several, select the tasks (or filter the list so only they match) and choose Set day for N selected in the bar above the list. Undo picks there puts them all back on their default days.

  3. Sort & filter sorts by Day and filters to one or more days, or to the tasks on Any day.

Your day choices are part of the draft, so Save draft keeps them, and they take effect when the visit is prepared. A task added on the checklist after the visit is prepared is not tied to a day.

Every task has a Time button, reading No time until it has one. A recurring task starts with the time it had on its last visit; a carryover or a task already on the visit keeps its own.

  1. Select a task’s Time button and pick a start time. The end is an hour later unless you change it. No time clears it.

  2. A task whose time you changed is outlined. Set it back to its original time to undo the change.

Your times are part of the draft, so Save draft keeps them, and they are written onto the tasks when the visit is prepared. A timed task then sits at its hour on the calendar of whoever it is assigned to; see Schedule a task for a time.

The Bring section gathers what the ticked tasks need into one list, grouped into tools, PPE, and supplies and plain items. Each item names the tasks that need it, so the chainsaw two tasks share is listed once. Unticking a task drops anything only it needed. Equipment that needs repair or is out of service is flagged.

  1. Pick the Vehicle for this visit. It starts on a vehicle a ticked task needs, otherwise on the one you took last.

  2. Untick anything you won’t need this time.

  3. To bring something no task asks for, select Add equipment or an item for this visit. Pick a piece of equipment, or type an item and choose Add “…” as an item. It is listed as Added for this visit; untick it to take it off again.

After the visit is prepared, the list is on the visit’s Bring panel, where items are ticked as they are loaded and can still be changed.

Select Save draft to keep your choices, including the Bring list and your assignee picks, and come back later. The draft is yours: you open the page where you left it, and the visit’s panel reads Continue Preparing with when you saved it. Each person preparing the visit keeps their own draft. Discard draft throws yours away and starts again from the full list.

If you leave the page with unsaved changes, Steadwell asks you to confirm first.

You can start on a visit before it is the estate’s next one, as long as it is within the next 60 days. Open the calendar, select the visit’s day, and select Prepare on the visit’s card. You can also right-click the visit (press and hold on a phone or tablet) and select Prepare visit.

The page works as it does for the next visit. Choose tasks, pick days and assignees, set the Bring list, add a task, and select Save draft. On the calendar the card then reads Continue draft.

Some things wait until this is the next visit:

  • Prepare N Tasks stays off. The note beside it names the visit before it, which has to be closed out first.
  • Work carried over from earlier visits isn’t listed yet, because the visits in between can still finish it. Once this is the next visit, the carryover appears on the page, already selected.

A task you add with Add task goes onto the visit straight away, as it does on the next visit. It doesn’t mark the visit prepared.

If the visit is rescheduled, your draft moves with it to the new date. When the visit becomes the next one, open it from the visit’s Continue Preparing panel and finish preparing it.

  1. Select Prepare N Tasks (Prepare Visit when the list is empty). A summary shows how many tasks the visit will include.

  2. Select Prepare Visit. You land on the visit checklist, which is ready to work, and the draft is cleared.

  • Selected firm tasks are created as open work on the visit.
  • A selected carryover task moves onto this visit.
  • An unchecked task, whether firm, carryover or an added one-off, is recorded as Skipped on this visit. Like any skipped work, it comes back on the next visit.
  • Ticked requests join the visit.
  • The Bring list and the vehicle are saved with the visit.

Preparing again later adds only what is new. Tasks already on the visit are never duplicated.